Of the many problems you can have in your apartment, some of the most annoying and ugliest are the appearance of dark mold and moisture stains. The appearance of these stains on the walls is annoying and serious, but a solvable problem that can be remedied in several ways.
Depending on how serious the problem is, you can remove the stains with natural remedies, chemicals, and paints, and sometimes you will have to do construction work. But don’t worry, we are here to tell you what you need to do to get rid of moisture and mold and keep your walls clean.
Removing With Bleach
When trying to remove bleach stains, be prepared to give the process the time and not give up lightly. Know that the bleach will need to stay in place for a few hours, and it works best on smooth surfaces, such as tiles and tubs, while it is not so effective on walls. In that case, you could contact a mold removal service, as mold on walls is a bigger problem, and you could use the help of an expert. Another useful piece of advice is that bleach is best combined with cotton wool. Soak cotton wool balls with bleach and leave them placed in the stained spots. It is best to leave it overnight and wash it off in the morning.
When dealing with bleach, remember that it can be very dangerous for your health and that you must protect your hands and respiratory tract!
We recommend a ratio of one cup of bleach to ten cups of water.
Vinegar Can Help Too
Not only is it effective in the kitchen, but vinegar also removes mold stains from the walls. It is very effective and in most cases solves the problem with the mold. You can use it in tandem with baking soda or without it.
If you want to try it with baking soda, then pour vinegar into the soda bowl, mix, and gradually add more baking soda while mixing. This mixture should be mushy, about thinner than toothpaste. When you have finished making the mixture, apply it to
the stain and clean it after half an hour.
If you still want to remove stains without adding baking soda, then pour white vinegar into a spray bottle, then spray the surface where the mold is, and after about 15 minutes wipe it off. The procedure is similar to the first, only slightly easier.
Removal of Mold and Moisture With Hydrogen Peroxide
The use of hydrogen peroxide is really wide, and it is best known for its bleaching power. So you can use it to remove mold from the walls, and you will need three percent hydrogen. Preparation is simple.
Fill the spray bottle with 3 percent hydrogen peroxide and treat the moldy surfaces until they are completely saturated.
Allow 15 minutes for the hydrogen peroxide to destroy the stains, then clean the area.
Grapefruit Seeds
Pour 450 milliliters of water and 20 drops of grapefruit seed extract into a spray bottle. Then shake the bottle well to mix the ingredients properly. Spray the liquid on the problematic areas and let it stay for a while.
There is no need to wipe it off later.
Remove Mold Only With Baking Soda
Baking soda is a fantastic substance that can be used for a variety of things around the house, including removing mold. Other products containing harsh chemicals may be difficult to tolerate; however, baking soda is light and family-friendly.
It not only eliminates mold but also unpleasant scents, therefore you may use it to get rid of odors caused by mold.
You will need a quarter spoonful of soda and add it to a bottle of water. Shake it to dissolve the agent and spray the walls and other surfaces that are affected by mold. Remove the mold with a sponge or other piece of cloth for cleaning. Rinse it thoroughly to clean any residue. Spray this surface with a mixture of soda and water and let it dry. Finally, you can be sure that mold will not appear again.
Last but Not Least
The final and lasting blow to the appearance of condensation and mold is given by the final acrylic paint Perma White. Applying this anti-condensation paint creates a strong and waterproof protective film that repels moisture, thus preventing the formation of mold stains.
If you notice moisture or traces of mold in your house, our professional and friendly advice is to do everything you can to fix the problem as soon as possible. Moisture and mold not only spoil the appearance of the space but also adversely affect your health.
